Materials - Courses 3, 4 and 6
Below is a list of the components required to follow the course content of the "Electronics: concepts and basic components", "Physical computing with Arduino" and "Intelligent connected objects" courses.
We also point out some vendors who offer the listed components, to assist you in the acquisition process - however, how you will purchase the items is at your discretion.
As these are hands-on courses, it is important that you have access to the materials on the list before the courses start, so you can get the most out of the lessons.
Basic Components List - Course 3 - Electronics: concepts and basic components
| Amount | Component | Note |
|---|---|---|
| 1 | Breadboard (mini) | |
| 20 | Jumper Wires Female/Female | |
| 20 | Jumper Wires Male/Male | |
| 1 | Mini Photocell (photo resistor) 5mm | |
| 5 | LED Red 3mm Diffused | |
| 5 | LED Green 3mm Diffused | |
| 5 | LED Yellow 3mm Diffused | |
| 2 | Linear Potentiometer 10kΩ | |
| 1 | Buzzer 5V | |
| 5 | Push Button | |
| 20 | Resistor 120Ω 1/4w | |
| 20 | Resistor 330Ω 1/4w | |
| 20 | Resistor 1kΩ 1/4w | |
| 20 | Resistor 4.7kΩ 1/4w | |
| 20 | Resistor 10kΩ 1/4w | |
| 1 | 9-volt Battery | |
| 1 | 9V Snap Connector | |
| 10 | Diode - 1N4007 or 1N4148 | Optional |
| 20 | Resistor 10MΩ 1/4W | Optional |
| 20 | Resistor 1MΩ 1/4W | Optional |
Basic and optional components list - Course 4 - Physical computing with Arduino
| Amount | Component | Note |
|---|---|---|
| 1 | Arduino UNO R3 board with USB cable | Mandatory component |
| 1 | WiFi ESP-01S module | Mandatory component |
| 1 | Bluetooth HC-05 or HC-06 module | Recommended component |
| 1 | Digital Multimeter | Recommended component |
| 1 | Breadboard (mini) | Included in the Course 3 list |
| 20 | Jumper Wires Female/Female | Included in the Course 3 list |
| 20 | Jumper Wires Male/Male | Included in the Course 3 list |
| 1 | LDR 5mm | Included in the Course 3 list |
| 5 | LED Red 3mm Diffused | Included in the Course 3 list |
| 5 | LED Green 3mm Diffused | Included in the Course 3 list |
| 5 | LED Yellow 3mm Diffused | Included in the Course 3 list |
| 2 | Linear Potentiometer 10kΩ | Included in the Course 3 list |
| 1 | Buzzer 5V | Included in the Course 3 list |
| 5 | Push Button | Included in the Course 3 list |
| 20 | Resistor 120Ω 1/4w | Included in the Course 3 list |
| 20 | Resistor 330Ω 1/4w | Included in the Course 3 list |
| 20 | Resistor 1kΩ 1/4w | Included in the Course 3 list |
| 20 | Resistor 4.7kΩ 1/4w | Included in the Course 3 list |
| 20 | Resistor 10kΩ 1/4w | Included in the Course 3 list |
| 1 | 9-volt Battery | Included in the Course 3 list |
| 1 | 9V Snap Connector | Included in the Course 3 list |
| 1 | AA battery | Recommended component |
| 1 | Battery Holder - 4xAA | Recommended component |
| 10 | Diode - 1N4007 ou 1N4148 | Optional item. Included in the Course 3 list. |
| 20 | Resistor 10MΩ 1/4W | Optional item. Included in the Course 3 list. |
| 20 | Resistor 1MΩ 1/4W | Optional item. Included in the Course 3 list. |
| 1 | Simple Power Bank (ex. As-001 Hardline / Multilaser CB069) | Purchasing recommended |
| 1 | Laser Module | Purchasing recommended |
| 1 | LED - RGB Common Cathode | Purchasing recommended |
| 1 | Humidity sensor module | Purchasing recommended |
| 1 | Pair Emitting LEDs and Infrared Detector | Purchasing recommended |
| 1 | 5V Relay Module 2 channels | Purchasing recommended |
| 1 | Temperature and Humidity Sensors - DTH11 | Purchasing recommended |
| 1 | Ultrasonic Sensor HC-SR04 | Purchasing recommended |
| 1 | Micro Servomotor (9g) | Purchasing recommended |
| 1 | Presence Sensor | Optional item, depending on interest. |
| 1 | Sound Sensor | Optional item, depending on interest. |
| 1 | Module for DC motor (Driver L298N) | Optional item, depending on interest. |
| 1 | DC 5V Motor | Optional item, depending on interest. Module for DC Motor purchasing, recommended for ease of use. |
| 10 | Transistor 2N2222/PN2222 | Recommended component |
| 10 | Capacitor 100nF | Optional item |
| 10 | Capacitor 100pF | Optional item |
| 10 | Capacitor 100uF | Optional item |
| 1 | Sensor MPU6050 (Spin + Accelerometer 6-axis) | Optional item |
Basic and optional components list - Course 6 - Intelligent connected objects
| Amount | Component | Note | |
|---|---|---|---|
| 1 | Arduino UNO R3 board with USB cable | Mandatory component. Included in the Courses 4 list. | |
| 1 | Bluetooth HC-05 or HC-06 module | Mandatory component. Included in the Courses 4 list. | |
| 1 | NodeMCU Module (models ESP-12/ESP-12E or later) | Mandatory component. | |
| 1 | Breadboard (mini) | Mandatory component. Included in the Courses 3 and 4 list. | |
| 20 | Female/Female Jumper Wire | Mandatory component. Included in the Courses 3 and 4 list. | |
| 20 | Jumper Wires Male/Male | Mandatory component. Included in the Courses 3 and 4 list. | |
| 2 | LED Red 3mm Diffused | Mandatory component. Included in the Courses 3 and 4 list. | |
| 2 | LED Green 3mm Diffused | Mandatory component. Included in the Courses 3 and 4 list. | |
| 2 | LED Yellow 3mm Diffused | Mandatory component. Included in the Courses 3 and 4 list. | |
| 1 | Linear Potentiometer 10kΩ | Mandatory component. Included in the Courses 3 and 4 list. | |
| 1 | Temperature and Humidity Sensors - DTH11 | Recommended component. | |
| 1 | Digital multimeter | Recommended component. |
List of stores
Brazil
- Arduinolandia (PE)
- Ardueletro (GO)
- Auto Core (CE)
- Baú da Eletrônica (SP)
- Curto Circuito (SP)
- Cinestec (SP)
- Eletrodex (MG)
- Eletrogate (MG)
- Filipe Flop (SC)
- HU Infinito (DF)
- Mult Comercial (SP)
- Multilógica-Shop (SP)
- Robocore (SP)
- Smart Kits (CE)
- Solda Fria (SP)
Worldwide
The indicated components can be purchased for significantly lower values abroad, especially in China. But keep in mind that the delivery time can be quite long (between 1 and 2 months).
- AliExpress (China)
- Deal Extreme (China)
- adafruit (EUA)
- Sparkfun Electronics (EUA)
Last update: January 17, 2019